Welder (First Class) Australian PR Points Calculator 2026, ANZSCO 322313

✍ Written by AU PR Calculator Editorial🔍 Reviewed against Schedule 6D and DHA guidance📅 Published: 10 November 2026🔄 Updated: 17 November 2026⏱ 6 min read

Key Facts: Welder (First Class) Skilled Migration 2026

  • • ANZSCO Code: 322313: Welder (First Class)
  • • Occupation list: MLTSSL — 189, 190 and 491 are offered
  • • Skills assessment body: Trades Recognition Australia (TRA)
  • • Latest 189 round (15 October 2026): minimum invited score 80 points. Subclasses 190 and 491 are set by each state.
  • • State nomination: Not confirmed here. Check each state's current occupation list and criteria for Welder (First Class)
  • • Assessment processing time: Approx. 120 days for a standard Migration Skills Assessment
  • • Assessment fee: AUD $795 for the standard Migration Skills Assessment (other TRA pathways, such as OSAP, have different fees)

Your Welder (First Class) PR Points Score

Welder (First Class) (ANZSCO 322313) pre-selected. Complete the remaining fields to see your score.

189 Score
?
80 (15 October 2026 round)
Calculate below
190 Score (+5)
?
State criteria apply
Calculate below
491 Score (+15)
?
State criteria apply
Calculate below
Calculate Full Score →

Australian PR Points for Welder (First Class), ANZSCO 322313

First class welders make and repair metal products and structures using a range of welding techniques. They line up parts with hand tools and measuring instruments, join metal sections by welding, bolting and riveting, then inspect each weld and finish it by grinding, filing or chiselling.

Your Career, the Australian Government careers site, puts the workforce at about 19,900 people, with a median age of 42 and 87% working full time. About 30% work in Victoria, 24% in New South Wales, and 17% each in Queensland and Western Australia.

Welder (First Class) is on the MLTSSL, so it can apply under the points-tested visas. In the 15 October 2026 SkillSelect round, subclass 189 invitations for this occupation were issued at a minimum of 80 points.

Subclass 189: Skilled Independent

No state nomination is needed. Check the minimum invited score for the latest round.

→ 189 eligibility explained

Subclass 190: State Nominated

A state nomination adds 5 points. Each state sets its own criteria, so check whether it nominates this occupation.

→ See the 190 requirements

Subclass 491: Regional

The 491 bonus of 15 points applies to a state or territory nomination, or to eligible family sponsorship.

→ See the 491 requirements

What a Welder (First Class) Does

The official description of ANZSCO 322313 lists these main duties, in our words:

  • Line up the parts to be joined, using hand tools and measuring instruments.
  • Join metal sections by welding, bolting and riveting.
  • Inspect welds for bead width, penetration and accuracy.
  • Clean and smooth welds by filing, chiselling and grinding.

Similar occupations: which code fits your work?

A skills assessment is made for one nominated occupation, so compare the descriptions before you apply.

OccupationAssessed by
Metal Fabricator
ANZSCO 322311

Marks out and fabricates structural steel and other metal to make or repair products and structures.

TRA
Pressure Welder
ANZSCO 322312

Welds and repairs pressure vessels and pipes to the relevant standards.

TRA
Fitter-Welder
ANZSCO 323213

Fits, assembles and welds parts to build production machines and other equipment.

TRA

Home Affairs uses ANZSCO 2013 codes for the 189, 190 and 491 visas, and ANZSCO 2022 codes for the 482 and 186. Welder (First Class) is 322313 in both.

Sources: Your Career: Welder (First Class), Jobs and Skills Australia: ANZSCO definition and Home Affairs skilled occupation list, checked 10 November 2026.

Your Welder (First Class) Score Across the Points-Tested Pathways

Subclass 189Subclass 190Subclass 491
Nomination bonus
+0+5+15
Cutoff data
80 (15 October 2026 round)State criteria applyState criteria apply
Occupation list
MLTSSLMLTSSLMLTSSL
Assessing body
TRATRATRA

* 189 figures are the minimum scores invited in the 15 October 2026 Home Affairs round. An occupation not listed had no invitation in that round. Subclasses 190 and 491 are set by each state.

→ See our monthly invitation round tracker for recent general trends
Assessing bodyTrades Recognition Australia (TRA)
Typical processingApprox. 120 days for a standard Migration Skills Assessment
FeeAUD $795 for the standard Migration Skills Assessment (other TRA pathways, such as OSAP, have different fees)
Official websitewww.tradesrecognitionaustralia.gov.au

Skills Assessment

The assessing body is TRA. Its fees and timeframes change, so check its site before you plan a timeline.

→ Official assessment page
⚠ Warning: Your skills assessment must remain valid at the time you receive your Invitation to Apply, not just when you submit your EOI. Check the validity period on your outcome letter.

What the States Say About Welder (First Class)

  • NSW (190): Unit group 3223 (Structural Steel and Welding Trades Workers) is on the NSW Skills List for the 190.
  • Victoria: Not on Victoria's 2026-27 priority list.
  • ACT: Minimum Matrix scores for unit group 3223 in the 15 September 2025 round (not in the 12 October 2026 ranking): Canberra resident 491 90, Canberra resident 190 100; not considered: overseas 491, overseas 190. Work out your Canberra Matrix score.

Sources: NSW Skills Lists (checked 21 October 2026), Victorian Points Test page (checked 20 October 2026) and the ACT invitation round rankings (checked 21 October 2026). NSW only considers occupations in a listed unit group that are eligible for the visa, and Victoria still ranks ROIs from other eligible occupations in its most competitive selection. Lists change during the year, so check each state's site before you apply.

State Nomination

State nomination adds +5 points (190) or +15 points (491). Whether a state nominates this occupation depends on its current list.

StateProgram status
New South Wales190 by invitation; 491 closed (checked 17 Nov 2026)
Victoria190 open (900 places); 491 not yet (checked 17 Nov 2026)
Queensland2026-27 ROIs open since 6 November (checked 17 Nov 2026)
Western AustraliaInvitations from SkillSelect, monthly (checked 17 Nov 2026)
South AustraliaLimited onshore ROIs; offshore by EOI (checked 17 Nov 2026)
Tasmania2026-27 open; weekly invitations (checked 17 Nov 2026)
ACTMatrix open; rounds Nov 2026 (checked 17 Nov 2026)
Northern Territory190 closed; 491 by exception only (checked 17 Nov 2026)

Note: State occupation lists are updated periodically. Always verify at each state's official migration portal before applying.

→ Compare state options for Welder (First Class)

How to Improve Your Score

These are the changes with a direct effect on points for ANZSCO 322313.

Points categoryPoints GainedNotes
Superior English (if at Proficient)+10Moving from Proficient (IELTS 7.0) to Superior (IELTS 8.0 in each component, or PTE L69 R70 W85 S88)
State nomination (190)+5Depends on state process
State nomination or family sponsorship (491)+15Depends on state process
Australian skilled employment (1 to 2 years)+51 to 2 years, within the last 10 years
NAATI CCL (if bilingual)+5Credentialed Community Language test
→ Ways to raise a Welder (First Class) score

How the Proposed 2026 Reform Affects This Occupation

⚠ What is official so far: The 2026–27 Budget committed to a new points test that selects better educated, higher-skilled and younger migrants. On 17 September 2026 the Minister for Home Affairs said people skilled in the housing trades will get the same points as a university qualification. The new points table and its start date have not been published, so the current Schedule 6D points test still applies.

Until the new table is published, nobody can say how it will treat ANZSCO 322313. Plan around the current Schedule 6D points and the latest published round data.

→ Learn more about the 2026 points test reform

Frequently Asked Questions: Welder (First Class) PR Points

What was the subclass 189 minimum for Welder (First Class)?▼
In the 15 October 2026 SkillSelect round, subclass 189 invitations for this occupation were issued at a minimum of 80 points. Its tie-break date was 01/09/2026: with equal scores, the EOI that reached its score earlier was invited first. In the 4 June 2026 round the minimum was 80.
What's the difference between Welder (First Class), Fitter-Welder and Pressure Welder?▼
They are separate ANZSCO codes, all on the MLTSSL and all assessed by TRA. A Welder (First Class), 322313, fabricates and repairs metal products by welding. A Fitter-Welder, 323213, fits, assembles and welds parts to build production machines and equipment. A Pressure Welder, 322312, welds and repairs pressure vessels and pipes to the relevant standards. Choose the code that matches your work.
What does a Welder (First Class) do?▼
First class welders make and repair metal products and structures using a range of welding techniques. They line up parts with hand tools and measuring instruments, join metal sections by welding, bolting and riveting, then inspect each weld and finish it by grinding, filing or chiselling.
Which occupations are similar to Welder (First Class)?▼
Metal Fabricator (322311), assessed by TRA; Pressure Welder (322312), assessed by TRA; Fitter-Welder (323213), assessed by TRA. A skills assessment is made for one nominated occupation, so check which description matches your work before you apply.
Is Welder (First Class) on the NSW Skills List?▼
Unit group 3223 (Structural Steel and Welding Trades Workers) is on the NSW Skills List for the 190.
What Canberra Matrix score did Welder (First Class) need?▼
Minimum Matrix scores for unit group 3223 in the 15 September 2025 round (not in the 12 October 2026 ranking): Canberra resident 491 90, Canberra resident 190 100; not considered: overseas 491, overseas 190.

Is this occupation on the skilled occupation list?

Welder (First Class) (ANZSCO 322313) is on the MLTSSL list. To see how the MLTSSL, STSOL, ROL and CSOL differ, check our guide:

→ Check the skilled list for Welder (First Class)

Related Occupations, PR Points Guides

Calculate Your Welder (First Class) PR Score Now

See your score across subclass 189, 190 and 491 visa options.

Calculate My Score →